Indexing timing tool, Seed meter disks – Great Plains YP1625A Operator Manual User Manual
Page 125
Great Plains Manufacturing, Inc.
Options and Accessories
121
2013-08-13
401-625M
Indexing Timing Tool
The timing tool comes standard on new twin row
planters. It is used to shift the chain position by one tooth
per tool rotation. For further information and directions
on how to use the timing tool see the Seed Rate manual
401-625B. For easy access the timing tool can be
ordered with hardware for mounting it under the
walkboard.
Seed Meter Disks
Air-Pro
®
meters accept a variety of seed disks, each
optimized for specific seeds, plus a special blank disk for
row shut-off. Disks are simple to change. Choices
include:
Timing Tool Assembly
403-557H
Part Number
Timing Tool Holder
403-556H
Pin Lynch 3/16
× 1 9/16 Long
805-240C
Timing Tool, 19 Tooth
812-391C
31445
Meter Disks
Part
Number
Blank, 0 Cell
817-841C
Corn, 24 Cell (Large, Flat)
817-836C
Corn, 24 Cell (Large, Round)
817-794C
Corn, 24 Cell (Small, Round or Flat)
817-795C
Corn, 40 Cell (Large, Flat)
817-838C
Corn, 40 Cell (Large, Round
817-796C
Corn, 40 Cell (Small, Round or Flat)
817-797C
Cotton, 60 Cell
817-857C
Milo, Pelletized Sugar Beet, 65 Cell
817-849C
Milo, Pelletized Sugar Beet, 130 Cell
817-800C
Soybeans, 84 Cell
817-798C
Soybeans, 168 Cell
403-551D
Sunflower, 24 Cell (Large), Popcorn
817-851C
Volumetric No. 1, 84 Cell
817-867C
29594