Definitions, Owner assistance – Great Plains YP1625A Operator Manual User Manual
Page 16
12
YP1125A & YP1625A
Great Plains Manufacturing, Inc.
401-625M
2013-08-13
Definitions
The following terms are used throughout this manual.
Right-hand and left-hand as used in
this manual are determined by facing
the direction the machine will travel
while in use unless otherwise stated.
An orientation rose in some line art
illustrations shows the directions of:
Up, Back, Left, Down, Front, Right.
A crucial point of information related to the preceding topic.
Read and follow the directions provided before continuing, to
ensure safety, avoidance of machine damage, and to achieve
desired field results.
Note: Useful information related to the preceding topic.
Owner Assistance
If you need customer service or repair parts, contact a
Great Plains dealer. They have trained personnel, repair
parts, and equipment specially designed for Great Plains
products.
Refer to Figure 2
Your planter’s parts were specially designed and should
only be replaced with Great Plains parts. Always use the
serial and model number when ordering parts from your
Great Plains dealer. The serial-number plate is located
on the rear face of the right axle.
Record your Planter model and serial number here for
quick reference:
Model Number:__________________________
Serial Number: __________________________
Your Great Plains dealer wants you to be satisfied with
your new machine. If you do not understand any part of
this manual or are not satisfied with the service received,
please take the following actions.
1.
Discuss the matter with your dealership service
manager. Make sure they are aware of any problems
so they can assist you.
2.
If you are still unsatisfied, seek out the owner or
general manager of the dealership.
U
D
F
B
L
R
For further assistance write to:
Product Support
Great Plains Mfg. Inc., Service Department
PO Box 5060
Salina, KS 67402-5060
Figure 2
Serial Number Plate
27284
U
D
B
F
R
L