Great Plains YP1625A Operator Manual - Manual (Page 107)

Great Plains Manufacturing, Inc. Table of Contents Index Maintenance and Lubrication 103
2013-08-13 Table of Contents Index 401-625M
Seed Flap Replacement
(YP1225A s/n B1010E- and YP1625A s/n B1002F-)
Refer to Figure 132
To replace a seed flap
use a needle nose pliers or
similar tool and squeeze the tabs together. Pull plastic
seed flap down out of metal bracket .
If replacing with 817-349C:
Push new seed flap
up through metal bracket until
tabs on seed flap snap in place.
If replacing with 816-302C:
See seed flap replacement instructions below.
Seed Flap Replacement
(YP1225A s/n B1011E+ and YP1625A s/n B1003F+)
Refer to Figure 133
To replace an 816-302C seed flap
use a needle nose
pliers or similar tool to grasp “T” top of flap. Pull upward
to pull flap up out of metal bracket
.
Push new seed flap down through metal bracket
until flap snaps into place with “T” top resting on top of
bracket.
Figure 132
817-349C Seed Tube Flap
18398
3
2
1
2
1
2
1 3
1 3
2
1
Figure 133
816-302C Seed Tube Flap
31047
2
1
2
1 2