Great Plains CDA600 Operator Manual - Manual (Page 72)

Centurion CDA600
270-600M-ENG
70 2013-06-14
5.0 Servicing and
Maintenance
Follow the safety instructions for
servicing and maintenance.
5.1 Servicing
Your machine has been designed and
constructed for maximum performance,
operational
efficiency and operator
friendliness under a wide variety of
operating conditions.
Prior to delivery, your machine has
been checked at the factory and by your
authorised dealer to ensure that you
receive a machine in optimum condition.
Adjustments may be needed to suit your
field conditions.
To ensure trouble-free operation,
it is important that servicing and
maintenance work is performed at
the recommended intervals.
5.2 Cleaning
In order to ensure that the machine is
always in operating condition and to
achieve optimum performance, perform
the cleaning and servicing work at regular
intervals.
Avoid cleaning any bearings with a high-
pressure hose or a direct water jet. The
housing, screwed connections and ball
bearings are not watertight.
Do not apply wax to any steps
or platforms. This may cause
people to slip and fall causing
injury.
5. Servicing and Maintenance
5.3 Preparation for
Storage
If you need to store the machine for a longer
period, observe the following points:
• Park the machine undercover if possible.
• Protect the discs against rust. If you need
to spray the implements with oil, use light,
biologically degradable oils, e.g. rape oil.
Cover any rubber sections before
using oil sprays. These sections
must not be oiled. Remove
any traces of oil with a suitable
cleaning agent.