Great Plains CDA600 Operator Manual - Manual (Page 15)

13 Centurion CDA600
270-600M-ENG
2013-06-14
1. Safety Information
Use a piece of paper or cardboard, NOT
BODY PARTS, to check for suspected leaks.
Wear protective gloves and safety glasses
or goggles when working with hydraulic
systems.
If an accident occurs, seek immediate
medical assistance from a physician familiar
with this type of injury.
1.7 Changing Equipment /
Settings
• Secure the machine to prevent it from
accidentally rolling away!
• Use suitable supports to secure any
raised frame sections suspended above
you!
• Caution! Risk of injury due to projecting
parts!
Never climb on to rotating parts such as
the roll unit. These parts may rotate cau-
sing you to slip and suffer serious injury!
Removing components during
maintenance may affect the stability
of the machine. Ensure it is fully
supported in case of unexpected
weight shifts.
Beware of trapping hazards
when manipulating moving parts
(changing tine depth for example).
Ensure any heavy components
are fully supported when removing
pins / bolts.
1.8 During Operation
Ensure that the working range and the area
around the machine are clear (children!)
before operating the machine.
Always ensure adequate visibility!
Do not stand on the machine while it is in
operation!
Operators must have a valid driving licence
in order to drive on public roads. In the
operating area, the operator is responsible
for third parties.
The person in charge must:
• provide the operator with a copy of the
Operating Instructions, and
• ensure that the operator has read and
understood the instructions.
• make sure that the operator is aware of the
specific regulations relating to the machine
when driving on public roads.