7 diagnostic screens – Great Plains CDA600 Operator Manual User Manual
Page 58

Centurion CDA600
270-600M-ENG
56
2013-06-14
Screen 2
1. Activates the pre-emergence marker
circuit.
2. Activates the left hand boutmarker.
3. Activates the right hand boutmarker.
4. Activates left hand half-width shut-off.
5. Activates right hand half-width shut-off.
6. Switches to diagnostic page 3.
Screen 3
1. Activates left hand tramlining. Hold for
3 seconds to turn on and 3 seconds to
turn off again.
4. Adjustment / Operation
4.18.7 Diagnostic
Screens
The Diagnostic screens are used to identify
any problems within within the system. The
buttons along the sides are used to activate
the various circuits / functions of the drill.
Screen 1
1. This activates the cultivation section
allowing it to lift and lower.
2. This activates the row units allowing
them to lift and lower.
3. Row unit down pressure.
4. This isolates the wing fold circuit.
5. This isolates the road transport circuit.
6. Switches to diagnostic page 2.
Figure 42. Diagnostics Screen 1
Figure 43. Diagnostics Screen 2
Figure 44. Diagnostics Screen 3