beautypg.com

5 hitching tractor to drill – Great Plains CDA600 Operator Manual User Manual

Page 23

background image

21

Centurion CDA600

270-600M-ENG

2013-06-14

2.5 Hitching Tractor to

Drill

You may be severely injured or
killed by being crushed between
the tractor and drill. Do not
stand or place any part of your
body between drill and moving
tractor. Stop tractor engine and
set tractor parking brake before
attaching cables and hoses.

1. Back up the tractor to align tractor link

arms and drill linkage.

2. Engage the link arms and the drill

linkage, ensuring the balls are seated
correctly.

3. Raise the link arms / linkage and move

the parking stand into the work position.

4. Shut down tractor and remove key.

5. Connect hydraulic hoses (page 22).

6. Connect brake hoses (page 23).

7. Connect electrical cables (page 24).

2. Transportation / Installation

This manual is related to the following products: