Great Plains CDA600 Operator Manual - Manual (Page 56)

Centurion CDA600
270-600M-ENG
54 2013-06-14
4.18.5 Weigh System
To enter the fill amount:
• Add the weight desired into the ‘fill
amount’ box using the scroll wheel or
input buttons.
• Press the ‘start’ button.
• Add material to the hopper until the
target is reached - the screen will
display ‘HOPPER WEIGHT REACHED’
and alarm will sound.
• Press ESC to clear.
Meter Monitoring causes an alarm to sound
if the actual weight being seeded differs
from the calibrated amount being seeded.
4.18.4 Machine Tools
Screen
1. Weigh System - button enters the weigh
system screen.
2. Blockage button - enters the 'blockage'
screens.
3. Diagnostics - enters the diagnostics
screens.
4. Configuration panel - To enter the
configuration screens hold this button
for 5 seconds.
5. Home button - Returns to the home
screen.
6. Calibration - Enters calibration mode
(see page 62).
7. Machine totals - Enters the Machine
Totals screen.
8. Tramline setup - Enters the tramline
setup screens. See page for tramline
rhythms.
Figure 36. Machine Tools Screen
Figure 37. Weigh System Screen 1
4. Adjustment / Operation
Figure 38. Weigh System Screen 2