Great Plains CDA600 Operator Manual - Manual (Page 57)

55 Centurion CDA600
270-600M-ENG
2013-06-14
4. Adjustment / Operation
4.18.6 Blockage Screens
The Blockage screens are used to identify
blockages within the system.
The sensitivity of the sensors is altered
using a value between 1 and 10 (with 0
meaning the sensors are not active). The
recommended way of setting the sensors
is to increase the sensitivity until the alarm
sounds and then reduce it by 1 or 2. The
other information on the screen is used to
determine where blockages have occured.
Figure 39. Blockage Screen 1
Figure 40. Blockage Screen 2
Figure 41. Blockage Screen 3