Great Plains CDA600 Operator Manual - Manual (Page 29)

27 Centurion CDA600
270-600M-ENG
2013-06-14
2.10.2 Folding
Fold the drill for moves between fields,
transport over public roads, parking and
storage.
Follow the detailed instructions below until
this is a familiar operation.
1. Make sure boutmarkers are fully folded.
2. Move the drill to level ground with
adequate overhead and lateral
clearances for the fold operation.
3. Ensure that the working elements are
raised.
4. Activate the fold circuit on the control
panel to retract the fold cylinders.
One wing may reach the stop before
the other. A slight asymmetry is not
uncommon in folding.
5. Ensure that the wing lock engages
correctly.
6. Activate the lift circuit using the 'road
transport button on' the lift circuit.
Retract the lift cylinders to raise drill to
the lock channels. Lock using taps.
Ensure the hopper side panels
are closed before folding the
machine.
2. Transportation / Installation