Great Plains CDA600 Operator Manual - Manual (Page 38)

Centurion CDA600
270-600M-ENG
36 2013-06-14
Figure 10. Drawbar w/cross-shaft linkage
4.4 Tongue
The Centurion is fitted with a Category 3
or 4 cross-shaft linkage at the front of the
machine.
4.5 Track Eradictors
The track eradicators are mounted on a
hydraulically controlled beam allowing them
to be moved to follow the tractor wheels.
Each tine is sprung, allowing it to 'trip' over
any stones or other obstructions in work to
avoid damage.
The depth of the track eradicators can be
adjusted by removing the pin and moving
the notched profile up or down in the
mounting bracket before refitting the pin.
4. Adjustment / Operation
Figure 11. Track eradicators in raised position
Figure 12. Track eradicators in work position