beautypg.com

SoundOff Signal Combo License Plate User Manual

Warning

background image

To review our Limited Warranty Statement & Return Policy for this or any SoundOff Signal product please visit our website at www.soundoffsignal.com and select the “Warranty & Returns”

link along the left column of our home page. If you have questions regarding this product please contact Technical Services, Monday - Friday, 8 am to 5 pm at 1.800.338.7337, press #4 to

skip the automated message. Questions or comments that do not require immediate attention may be emailed to [email protected].

1.800.338.7337. / www.soundoffsignal.com / Thank you for trusting us with your safety!

Electrical Connections

White Wire

Ground

Black Wire

Tail Light

Red Wire

Stop Light

4” ROUND STOP-TAIL-TURN LIGHT
WITH INTEGRATED LICENSE
PLATE LIGHT

ECVR4(x)STTELP

ECVR4(x)STTELP-RD (Reduced Diodes)

!

WARNING

This product contains high intensity LED devices.

To prevent eye damage, DO NOT stare into the

light beam at close range.

• DO NOT connect this device to a strobe power supply. This product is self-contained and does not
require an external power supply.

ECVR4(x)STTELP 4.09

Important Information:

INSTALLATION

A. Drill pilot holes for #12 screws 2” on

center. These must be horizontal.

B. Drill appropriate size hole in center for

wire connections. Hole should not have
burrs or sharp edges that could scrape
or chafe wire as this could create a fi re
hazard.

C. Start #12 sheet metal screws (supplied)

in pilot holes. DO NOT INSTALL
COMPLETELY.

D. Seat keyhole slots of housing over

screws and tighten. DO NOT OVER

TIGHTEN.

E. Make electrical connections.
F. Push wires through surface of vehicle

and back of housing and install light
making sure rim of light snaps into all
three tabs of housing. Note rib on bottom
of light mates with slot in housing.

Rib on bottom of Light
fi ts into slot in housing

Housing (note
orientation)

#12 Screws

Light with Clear Base

TECHNICAL

SPECIFICATIONS

Overall

Dimensions:

n

4.6” x 2.9”D

Input Voltage

Range:

9-16Vdc

Certifi cations:

Stop/Tail/Turn:

SAE J1398,

J1395, J585,

DOT, FMVSS

108 & CMVSS

License Plate: SAE J587, FMVSS

108 & CMVSS

Operating

Temperature:

-20º to +65º C