SoundOff Signal Interior Dome - Manual

To review our Limited Warranty Statement & Return Policy for this or any SoundOff Signal product please visit our website at www.soundoffsignal.com and select the “Warranty & Returns”
link along the left column of our home page. If you have questions regarding this product please contact Technical Services, Monday - Friday, 8 am to 5 pm at 1.800.338.7337, press #4 to
skip the automated message. Questions or comments that do not require immediate attention may be emailed to [email protected].
1.800.338.7337. / www.soundoffsignal.com / Thank you for trusting us with your safety!
WIRING:
1. Connect the Dome Light’s white wire
to the vehicle’s ground (-) wire.
2. Connect the Dome Light’s black wire
to the vehicle’s positive (+) wire.
3X5 ECONOMY INTERIOR
DOME LIGHT
ECVDMLTST4
!
WARNING
This product contains high intensity LED devices.
To prevent eye damage, DO NOT stare into the
light beam at close range. • DO NOT install this product or route any wires in the Air Bag Deployment Zone. Refer to your vehicle
Owner’s Manual for the location of any air bag deployment zones.
ECVDMLTST4 11.10
Important Information:
INSTALLATION:
1. Using two holes on each end of the
Dome Light body as a template, mark
and drill the holes.
2. Make electrical connections (see
WIRING at right).
3. Mount the Dome Light using the 2
supplied mounting screws.
4. DO NOT OVERTIGHTEN SCREWS.
TECHNICAL
SPECIFICATIONS
Overall Dimensions: 5.83”L x 2.80”W x
0.77”H
Input Voltage Range: 9-16 Vdc
Current
Consumption:
<0.3 amps
Operating
Temperature:
-40º to +65º C
# of LEDs: 24