E-flite Advance 25e User Manual

Page 12

E-flite Advance 25e ARF Assembly Manual



5. Apply 2–3 drops of thin CA in each of the servo

mounting holes. This will harden the threads in the

surrounding wood, which will help prevent the servo

mounting screws from vibrating loose.



6. Mount the rudder and elevator servos in the

fuselage. Make sure to guide the servo leads

through the radio tray. Use a #1 Phillips screwdriver

to tighten the servo mounting screws.



7. Use scissors to cut two small pieces of hook and

loop tape to fit the main and remote receivers.

Apply the tape to the receivers as shown.



8. Mount the main receiver in the fuselage using the

hook and loop tape. Plug the rudder, elevator and

Y-harness for the aileron servos into the receiver at

this time.



9. Secure the remote receiver to the fuselage side

using the hook and loop tape.