Banner DUO-TOUCH Run Bar with STB Buttons - Manual (Page 14)

Model Description
STBA-RB1-S2 • Free-standing, telescoping stand; locates touch buttons 800
to 1232 mm (31.5" to 48.5") above the floor surface
• 610 x 610 mm (24" x 24") movable H-shaped floor base with
mounting holes 560 mm (22") apart
• Telescoping square tubes made of 12 ga cold-rolled steel; U-
channel feet are 2"W x 1"H x 1/8" thick cold-rolled steel;
black powdercoat paint
• STBA-RB1-S2 includes swivel-mount bracket STBA-RB1-MB3
to mount STBVP6-RB1... Run Bars •
• STBA-RB2-S2 includes swivel-mount bracket STBA-RB2-MB3
to mount STBVP6-RB2... Run Bars
• See datasheet 135635 for more information on STBA-RB1-S2
• See datasheet 145295 for more information on STBA-RB2-S2
STBA-RB2-S2
EZ-Light for Two-Hand Control
Model Description
T30GRYB11P
(shown on left) • EZ-LIGHT for Two-Hand Control
• Four-color indication: red, blue, green, and yellow
• See data sheet 134100 for more information
K50LGRYB11P
(shown on right)
EZ-LIGHT Wiring Table
LED Function Brown Wire Gray Wire Black Wire White Wire Typical Function
Red ON +V dc - - - Stop and/or Not Ready
Blue ON +V dc +V dc - Stopped, but Ready/Enabled
Green ON +V dc +V dc +V dc - Go
Yellow ON +V dc +V dc +V dc +V dc Mute Condition
Red Flashing Any other hookup combination Abnormal State
NOTES:
• Blue wire connected to 0 V dc
• Supply Voltage and Current = 10 to 30 V dc, 60 mA max.
DUO-TOUCH Run Bar with STB Buttons
14 www.bannerengineering.com - tel: 763-544-3164 Datasheet 131634_web Rev.
E