Banner EZ-SCREEN­ Safety Light Curtain Systems - Manual (Page 12)

page 12
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
System Components
EZ-SCREEN Grid
Instruction Manual
2.3 Replacement Parts
2.4 Literature
MGA-KS0-1 30140 Keyed reset switch (same as that included in kits)
MGA-K-1 28513 Replacement key for switch MGA-KS0-1
EZA-AP-1 62859 Access port plug with o-ring
EZA-CP-13 62860 Pg13.5 plug with o-ring
EZA-ECR-1 62857
Receiver wiring chamber end cap (with gasket, captive
screws, 3 plugs with o-rings, terminal block)
Model
Part
Number Description
EZA-ECE-1 62858
Emitter wiring chamber end cap (with gasket, captive
screws, 3 plugs with o-rings, terminal block)
EZA-TBE-1 62861 Emitter terminal block
EZA-TBR-1 62862 Receiver terminal block
EZA-SW-1 62863 Spanner wrench
EZA-MBK-1 60630 Standard end cap bracket kit (with hardware)
STP-3 43958 Test Piece, 1.75" dia.
60632 Manual
60633 Daily Checkout Card
60634 Semi-Annual Checkout Card
MSA Series Stands
(4) M10 Bolt
Pole
40 mm
(1.58") Square Usable
Stand
Height
Base
6.4 mm (0.25")
MSA-S42-1 43175 42"
MSA-S66-1 43176 66"
SSM-550, SSM-675
SSM-975, SSM-1175
To Fit Mirror Models Model
Part
Number Height
SG..2-584, SG..2-500
SG..3-533, SG..3-400,
SG..4-300
To Fit Sensor Models
SMA-MBK-1 61933 SSM Series Mirror Bracket Kit
NOTE: One EZA-MBK-2 Adaptor Bracket Kit required per sensor