Metrohm 758 KFD Titrino - Manual (Page 99)

3.2 Remote control commands
758 KFD Titrino
95
&Assembly
Object Description Input range Reference
& Root
:
├ Assembly Assembly control
├ . Bur Buret
│ ├ .Select Selection of buret internal D0, external D1
│ │ external D2 3.2.2.119.
│ ├ .Empty Empties the buret $G,$S,$H,$C 3.2.2.120.
│ ├ .Prep Prepares the buret $G,$S,$H,$C 3.2.2.121.
│ ├ .Rates Rates
│ │ ├ .Forward Forward rate
│ │ │ ├ .Select Type of rate control digital, analog 3.2.2.122.
│ │ │ ├ .Digital Digital rate 0...150, max. ditto
│ │ ├ .Reverse as for forward rate
│ │ │ ├ .Select Type of rate control digital, analog ditto
│ │ │ ├ .Digital Digital rate 0...150, max. ditto
│ ├ .Fill Fill $G,$H,$C 3.2.2.123.
│ ├ .ModeDis Dispensing $G,$S,$H,$C 3.2.2.124.
│ │ ├ .Select Type of dispensing control volume, time ditto
│ │ ├ .V Volume to be dispensed 0.0001...0.1...9999 ditto
│ │ ├ .Time Time to dispense 0.25...1...86 400 ditto
│ │ ├ .VStop Limit volume 0.0001...9999, OFF ditto
│ │ ├ .AutoFill Filling after each increment ON, OFF ditto
│
├ .Meas Measuring
│ ├ .Status Measuring ON/OFF ON, OFF 3.2.2.125.
│ ├ .MeasInput Selection of measuring input 1, 2, diff., Ipol, Upol, Temp ditto
│ ├ .Ipol Polarization current 0...1...±127 ditto
│ ├ .Upol Polarization voltage 0...400...±1270 ditto
│
├ .Outputs I/O outputs
│ ├ .AutoEOD Automatic output of EOD ON, OFF 3.2.2.126.
│ ├ .SetLines Set I/O lines $G ditto
│ │ ├ .L0 Signal on L0 active,inactive,pulse,OFF ditto
│ │ ├ up to L13
│ ├ .ResetLines Reset I/O lines $G ditto
│
├ .Stirrer Stirrer ON, OFF 3.2.2.127.
│