Metrohm 758 KFD Titrino User Manual
Page 129
3.2 Remote control commands
758 KFD Titrino
125
3.2.2.129. Setup.Keycode ON, OFF
ON means the key code of a key pressed on the Titrino is outputted. The key
code comprises 2 ASCII characters. A keystroke of key 11 is sent as follows:
#11
The beginning of the message is marked by a space (ASCII 32).
3.2.2.130. Setup.Tree.Short ON, OFF
Setup.Tree.ChangedOnly ON, OFF
Definition of the type of answer to $Q.
.Short:
With "ON", each path is sent with only the necessary amount of
characters in order to be unequivocal (printed in bold in this manual). A com-
bination of .Short and .ChangedOnly is not possible.
.ChangedOnly:
Sends only the changed values, i.e. values which have
been edited. All paths are sent absolute, i.e. from the root.
3.2.2.131. Setup.Trace ON, OFF
The Titrino automatically reports when a value has been confirmed with ter> at the Titrino. Message, e.g.: &SmplData.OFFSilo.Id1"Trace" The beginning of the message is marked by a space (ASCII 32). 3.2.2.132. Setup.Lock.Keyboard ON, OFF Setup.Lock.Config ON, OFF Setup.Lock.Parameter ON, OFF Setup.Lock.SmplData ON, OFF Setup.Lock.UserMeth.Recall ON, OFF Setup.Lock.UserMeth.Store ON, OFF Setup.Lock.UserMeth.Delete ON, OFF Setup.Lock.Display ON, OFF ON means disable the corresponding function: .Keyboard: Disable all keys of the Titrinos .Config: Disable the .Parameter: Disable the .SmplData: Disable the .UserMeth.Recall: Disable "recall" in .UserMeth.Store: Disable "store" in .UserMeth.Delete: Disable "delete" in .Display: Disable the display, i.e. it will not be written to by the device pro- gram of the Titrino and can be operated from the computer.