Metrohm 758 KFD Titrino User Manual
Page 120
3.2 Remote control commands
758 KFD Titrino
116
3.2.2.99. SmplData.ONSilo.SaveLines ON, OFF
Silo lines are not deleted when they are worked off. Assigned results are
stored as C24 and C25. "Save lines" can only be set to "ON" if the silo is
completely empty. Delete the silo, see 3.2.2.97.
3.2.2.100. HotKey.User.Name
up to 10 ASCII characters
HotKey.User.Delete $G
HotKey.User.Delete.Name
up to 10 ASCII characters
HotKey.User.DelAll $G
HotKey.User.List.1.Name read
only
Management of user names.
.Name:
Input of user names.
.Delete.Name: Deletes selected user name with &HotKey.User.Delete $G.
.List:
List of all user names.
3.2.2.101. Info.Report $G
Info.Report.Select
configuration, parameters, smpl data,
statistics, silo, calib, C-fmla, def, user method, full, short, mplist,
curve, scalc full, scalc srt, prep, calc, act dir, mem card, all, ff
$G sends the selected report to the COM which is set in
&Config.PeriphUnit.RepToComport:
configuration: Configuration report. Is not accessible during a running deter-
mination.
parameters: Parameter report of the current method. During a running deter-
mination only "live"-parameters are accessible.
smpl data: Current sample data.
statistics: Statistics table with the individual results.
silo:
Contents of the silo memory.
calib:
Calibration data of the measuring input in the current method.
C-fmla:
Contents of the
def:
Contents of the
user method: Contents of the method memory.
full:
Full result report of the last completed determination.
short:
Short result report of the last completed determination.
mplist:
Measuring point list of the running determination.
curve:
Curve volume vs. time (with SET and KFT) or measured value vs.
time (with MEAS) of the last determination.
scalc full: Full report of the silo calculations.
scalc srt: Short report of the silo calculations.
prep: Preparation
report.
calc:
Calculation report of the current method.
act dir:
Methods of the current directory of the memory card.
mem card: All methods of the memory card.
all: All
reports.
ff:
Form feed on printer.