Metrohm 758 KFD Titrino - Manual (Page 113)

3.2 Remote control commands
758 KFD Titrino
109
3.2.2.52. MemoryCard.ChangeDir $G
MemoryCard.ChangeDir.Name up to 10 ASCII characters
MemoryCard.ChangeDir.Checksum $G
MemoryCard.ChangeDir.Checksum.Value read only
Changing the current directory. The action is carried out if "$G" is transmitted
to the corresponding node.
Do not use blank characters before and after name!
The checksum characterizes the content of the directory.
3.2.2.53. MemoryCard.CreateDir $G
MemoryCard.CreateDir.Name up to 10 ASCII characters
Delete directory. The action is carried out if "$G" is transmitted to the corre-
sponding node.
Do not use blank characters before and after name!
3.2.2.54. MemoryCard.DelDir $G
MemoryCard.DelDir.Name up to 10 ASCII characters
Delete directory. The action is carried out if "$G" is transmitted to the corre-
sponding node.
Do not use blank characters before and after name!
3.2.2.55. MemoryCard.Backup $G
MemoryCard.Backup.Name up to 10 ASCII characters
Backup of the internal memory onto the card. The action is carried out if "$G"
is transmitted to the corresponding node.
Do not use blank characters before and after name!
3.2.2.56. MemoryCard.Reload $G
MemoryCard.Reload.Name up to 10 ASCII characters
Reload a backup from the memory card into the internal memory. The action
is carried out if "$G" is transmitted to the corresponding node.
Do not use blank characters before and after name!
3.2.2.57. MemoryCard.Format $G
MemoryCard.CardLabel.Name up to 8 ASCII characters
Format the memory card. The action is carried out if "$G" is transmitted to the
corresponding node.
Do not use blank characters before and after name!
3.2.2.58. MemoryCard.FreeMem read only
Free memory on the card. $Q sends number of free bytes, e.g. "4928".
3.2.2.59. MemoryCard.BatteryChange $G
MemoryCard.BatteryChange.Date YYYY-MM-DD
Date for changing battery. The date will be set with "$G".