Metrohm 864 Robotic Balance Sample Processor User Manual
864 robotic balance sample processor
Table of contents
Document Outline
- Table of contents
- Table of figures
- 1 Introduction
- 2 Overview of the instrument
- 3 Installation
- 3.1 Setting up the instrument
- 3.2 Preparing the Sample Processor
- 3.3 Guide chain for cables and tubing
- 3.4 Connecting a computer
- 3.5 Configuring instrument components
- 3.6 Setting up the Swing Heads and robotic arms
- 3.7 Installing rinsing and aspiration equipment
- 3.8 Installing the washing station
- 3.9 Installing and connecting the pump
- 3.10 Equipping the titration head
- 3.11 Connecting the tower stirrer
- 3.12 Setting up the dosing devices and the titrator
- 3.13 Installing the balance and the ionizer
- 3.14 Connections
- 3.15 Mounting the drip pan
- 3.16 Attaching the sample rack
- 3.17 Adjusting the rack and the robotic arm
- 3.18 Adjusting the weighing equipment
- 3.19 Adjusting the lift positions
- 3.20 Mounting the safety shield
- 3.21 Connecting MSB devices
- 3.22 Connecting USB devices
- 4 Handling and maintenance
- 5 Troubleshooting
- 6 Appendix
- 7 Technical specifications
- 8 Conformity and warranty
- 9 Accessories
- Index