Metrohm 864 Robotic Balance Sample Processor - Manual (Page 25)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 3 Installation
864 Robotic Balance Sample Processor ￭￭￭￭￭￭￭￭ 17
6.1625.010
Figure 10 Mounting the collection container for the pipetting tips
Note
The collection container seal is designed as a safety seal. If you are
processing highly toxic samples, you can hermetically seal off the
vessel with the contaminated pipetting tips and thus forward them
securely packaged for disposal. If the cover is pressed firmly onto
the vessel, then it cannot be reopened unless considerable effort is
applied!
3.3 Guide chain for cables and tubing
Tubings and cables can be placed into the guide chain.
You can open the individual chain links with a screwdriver as follows.
1 Open the guide chain
￭ Insert a screwdriver into the groove located on the side of a chain
link.
￭ Loosen the clip with a forceful leverage movement.
￭ Pull the clip out of the chain by hand.
￭ Repeat the above actions for each chain link.