Brandmotion 1009-9517 - Manual (Page 2)

INSTALLATION INSTRUCTIONS
1009-9000-00 2 of 18
9 August 2011
1. Loosen the screw that attaches the existing
rear view mirror to the windshield mounting
button with a T20 Torx driver. (Figure 1)
Figure 1
2. Slide the mirror upwards and towards the
rear to remove it from the windshield.
3. Open the hinged cover on back of the mirror
and disconnect the existing harness
connector. (Figure 2)
Figure 2
4. Remove the overhead console by releasing
the retention clips on the back of the unit,
then pulling it rearward. (Figure 3)
Figure 3
5. Remove the driver’s side sun visor anchor
using a T20 Torx driver. (Figure 4)
Figure 4