Brandmotion 1009-9517 - Manual (Page 10)

INSTALLATION INSTRUCTIONS
1009-9000-00 10 of 18
9 August 2011
Figure 21
28. Reinstall rear sill plate by pressing it back
into place with your hands.
29. Remove drivers-side kick panel insulation
pad retainers using a pushpin removal tool.
Route the supplied chassis harness behind
the insulation (between insulation and metal
frame) then reinstall the insulation. (Figure
22)
Figure 22
30. Reinstall the front kick panel/sill plate by
pressing it back into place with your hands.
31. Remove the green lock tab from the chassis
harness front connector by inserting the tip
of a screwdriver between the lock tab and
connector and prying the tab out.
32. Connect the supplied chassis harness and
the supplied interior harness. (Figure 23)
Figure 23
33. Reinstall the green locking tab.