beautypg.com

Pc-2200 – Bowers Group Advanced Electronic/Air Column PC-2200 User Manual

Page 11

background image

PC-2200

BOWERS METROLOGY page 11 /32 version 2.06 -E


Chapter 3. HOW TO USE IT



3.3 SWITCHING

ON THE COLUMN


To start the first time, we advise to make a general RESET .

Press + ON simultaneously,

Do not release your pressure on before the message RESET appears on the display, then a test
program will start.

The default parameters are :

CHANNEL : Source : Ext. - CH-A Ratio :1.000 Direc. +
MEASURE : M1 – Bar :Bottom B.fact. 1.00 – Range :

± 0.05 Sens : 1.000 Resol.:0.00005” – Func: A –

Mode: STATIC

SPEC. : M1 – NOMI. 000.0000 - -TOLER –0.0500 - +TOLER +0.0500 –APPROCH –0.0500
+ APPROCH : +0.0500
MASTER : M1 - -MASTER +0.00000 +MASTER +0.00000
CLASS : OFF
RS232 : SPEED 9600, DATA 8, PARITY N, TERM CRLF, RTS ON, PRINT BRIEF, RSMODE PRINT
ID NO. 000
ETC : GENERAL UNIT INCH, DISPLAY mm, INPUT HBT, P/W PROGRAM 0000, CALIBR OFF

AVERAGE BAR 005, DIGIT 005, A/D 20

VERSION V2.xx


The above parameters are the default values, so it is necessary to modify the values according to your
application.

Description of functions per menu

CHANNEL

: Select the source and the probes used with ratio and measuring direction.


MEASURE

: Select the starting position of the bar, Bar factor, Range of the Bar, Resolution of the digital

display, Combination of probes, Static or Dynamic measuring mode.


SPEC.

: Store the nominal size, the upper tolerance, the lower tolerance, the upper warning limit, the

lower warning limit of the component to be measured.


MASTER

: Store the lower master value and the upper master value used.


CLASS

: Active the classification mode, class number, starting value, class range.


RS232

: Select the transmission speed, word length, parity control, end of characters, request to send

signal, printing mode, simplex or duplex mode, identity number.


ETC
GENERAL : Select the unit (mm or inch), type of display (mm or um), type of probes used, program and

calibration password.


AVERAGE : Select the bar sensitivity , the display sensitivity, the analog board sensitivity.

VERSION : Show the software version.

Enter

▓ B O W E R S ▓

R E S E T . . .

- 1 . 0 4 0 0

Enter