Brother HL-4200CN - Manual (Page 47)

BASIC PRINTER OPERATION 2 - 15
Changing the Configuration for Options
Once you set the initial configuration of the printer, you must reconfigure the printer driver when you
install the following options:
1. 1 Tray Module
2. 2 Tray Module
3. Hard disk
4. Memory expansion
For details about how to install options, see the instructions provided with the options. In the following
section, it is assumed that the options are already installed.
Memory expansion
In general, DIMM must have the following specifications:
Type: 144pin and 64bit output
Clock frequency: 100MHz or more
Capacity: 64Mbyte-256Mbyte
Dram Type: SDRAM 2 Bank
The following DIMM sizes can be installed:
US
64 MB TECHWORKS 12345-0001
128 MB TECHWORKS 12462-0002
256 MB TECHWORKS 12469-0001
Europe
64 MB Buffalo Technology VN133-64M
128 MB Buffalo Technology VN133-128M
256 MB Buffalo Technology VN133-256M
2
1
3
4