Brother HL-4200CN - Manual (Page 32)

1 - 9 PRINTER SYSTEM SETTINGS
Confirming Settings
Print the printer settings list to check the content of printer settings.
The printer settings list also contains information that is required when configuring computers for printing.
Use the list to confirm that settings on the printer and the computer match.
For details about printing the Panel Settings List, see Confirming Printer Configuration and Network
Settings on page 7-19.
Continued from the previous step.
↓ Starting protocols
Protocol
LPD
1. Press the Form Feed/Set button
once. XXX indicates the protocol
name. ↓
6
Press the button once.
Protocol
Port9100
XXX
Disabled *
↓
7
Press the button once. 2. Press the button once.
Protocol
IPP
XXX
Enabled
↓
8
Press the button once. 3. Press the Form Feed/Set button
once. Reboot system to take
effect appears for 3 seconds,
and then the following screen will
appear.
Protocol
NetBIOS TCP/IP
↓
9
Press the button once.
Protocol
NetBEUI
XXX
Enabled *
↓ 10
Press the button once. 4. To start other protocols, press
the Job Cancel/Back or
button once, and then continue
to the next step.
Protocol
NetWare
↓ 11
Press the button once.
Protocol
AppleTalk
To finish the setup, go to step 12.
↓
12
Restart the printer.