Brother HL-4200CN - Manual (Page 29)

PRINTER SYSTEM SETTINGS 1 - 6
Setting the Subnet Mask
Continued from the previous step.
↓
Reboot system
to take effect
↓
3 seconds later, the following screen will appear.
IP Address
192.168.001.100*
↓
16
Press the Job Cancel/Back or button once.
The lower line of the screen returns to IP address .
Continued from the previous step
↓
TCP/IP
IP Address
↓
17
Press the button once.
TCP/IP
Subnet Mask
↓
18
Press the Form Feed/Set or button once.
Subnet Mask
000.000.000.000*
↓
19
Set the subnet mask in the same way as the IP address. To set
values with the
or button, you can hold down the button to
change the value sequentially.
Subnet Mask
255.255.255.000*
↓
20
Press the Job Cancel/Back or button once.
The lower line of the screen returns to Subnet Mask .