Brother HL-4200CN - Manual (Page 17)

xvi
Safety Precautions
To ensure the safe operation of your printer, make sure that you read this section thoroughly before use.
This section describes the conventions used in the guide.
Installing and Relocating your Printer
Do not place the printer in a hot, humid, dusty, or poorly ventilated environment. Prolonged
exposure to such adverse conditions can cause fire or electric shocks.
Do not place the printer near heaters or volatile, flammable, or combustible materials, such
as curtains.
Place the printer on a level, sturdy surface that can withstand the printer's weight. Failure
to do so could cause the printer to fall, resulting in injuries.
To prevent injuries, this printer should be lifted by at least two people.
"Warning" alerts you to situations that could result in serious injury or death.
"Caution" alerts you to situations that could cause injury or material damage.
This symbol alerts you to procedures that
require close attention. Make sure that you
read and follow the instructions carefully.
This symbol alerts you to prohibited
procedures. Make sure that you read the
instructions carefully.
This symbol alerts you to procedures that
need to be performed. Make sure that you
perform the procedure after reading the
instructions carefully.
WARNING
CAUTION
High
temperature
Flammable Electrical
shock
Finger injury
Do not
touch
No naked/
open flame
Prohibited Do no
dismantle
Do not
dismantle
Ground/Earth Remove the
plug
Hint
CAUTION