Brother HL-4200CN - Manual (Page 112)

5 - 23 TROUBLESHOOTING
Forcing the Printer to Print Remaining Data
(When Printing is Halted)
If the printer stops receiving data half way through a print job, the printer will wait for a pre-determined
time, during this wait, the control panel will display
Data Wait
. If you wish to, you can force the printer
to print the data that it has already received. Refer to the following steps for more information.
The default job time-out is 30 seconds. You can set the job time-out to between 5 and 300 seconds on
the control panel. For details about the job time-out function, see List of Menu Items on page 4-6.
Follow the steps below. Use the following control panel buttons.
For details about control panel operations, see Basic Menu Operation on page 4-4.
(The printer is processing)
1
Press the Form Feed/Set button once. The remaining data in the printer is printed out.
2
When processing is finished, the print screen re-appears.
(The print screen. The printer is ready to print.)