Rockwell Automation GV3000/SE Operator Interface Module (OIM) User Guide - Manual (Page 99)

B-12 GV3000/SE Operator Interface Module (OIM) User Guide, Version 2.0
B.2.9 Option Port Configuration Menu (If the Optional RMI Board Is
Installed)
These menus and parameters are only shown if the optional RMI board is installed.
•
RMI Inputs
• RMI Analog Inputs
• RMI ANLG INPUT OFFS (r.010)
• RMI ANLG INPUT GAIN (r.011)
• RMI Digital Inputs
• RMI DIG INPUT CONFIG (r.030)
• RMI Frequency Inputs
• RMI FREQ SAMP PERIOD (r.014)
• RMI FREQ INPUT OFFS (r.015)
• RMI FREQ INPUT GAIN (r.016)
• RMI PropInt Configuration
• RMI PI REG OFFSET (r.020)
• RMI PI REG PROP GAIN (r.021)
• RMI PI REG INT GAIN (r.022)
• RMI TRQ/CURR LIM SRC (r.025)
•
RMI Outputs
• RMI Analog Outputs
• RMI ANLG OUTPUT 1 (r.001)
• RMI ANLG OUT 1 OFFS (r.002)
• RMI ANLG OUT 1 GAIN (r.003)
• RMI ANLG OUTPUT 2 (r.004)
• RMI ANLG OUT 2 OFFS (r.005)
• RMI ANLG OUT 2 GAIN (r.006)
• RMI ANLG OUTPUT 3 (r.007)
• RMI ANLG OUT 3 OFFS (r.008)
• RMI ANLG OUT 3 GAIN (r.009)
• RMI Digital Outputs
• RMI DIG OUTPUT 1 CNF (r.031)
• RMI DIG OUTPUT 2 CNF (r.032)
• RMI DIG OUTPUT 3 CNF (r.033)
• RMI DIG OUTPUT 4 CNF (r.034)
• RMI DIG OUT1 DLY TIME (r.040)
• RMI DIG OUT2 DLY TIME (r.041)