Rockwell Automation MD65 EtherNet/IP Communication Module - Manual (Page 96)

9-8 EtherNet/IP Communications Module
9.3 Module Diagnostic Items in Multi-
Drive Mode
Table 9.6 lists diagnostic items that can be accessed using
VS Utilities software or the LCD OIM. Diagnostic items can help you
or Rockwell Automation personnel troubleshoot communication
problems.
48 EN Rx Errors A count of the number of errors receive by the
EtherNet MAC.
49 EN Packets Sent A count of the number of transmitted packets
reported by the EtherNet MAC.
50 EN Tx Errors A count of the number of transmit errors reported by
the EtherNet MAC.
Table 9.5 – Module Diagnostic Items (Continued)(Single Drive Mode)
No. Name Description
Table 9.6 – Module Diagnostic Items (Multi-Drive Mode)
No. Name Description
1 Reserved
2 Drv 0 Logic Cmd Logic Command being transmitted to drive 0 by
the module.
3 Drv 0 Reference Reference being transmitted to drive 0 by the
module.
4 Reserved
5 Drv 0 Logic Sts Logic Status being received from drive 0 by the
module.
6 Drv 0 Feedback Feedback being received from drive 0 by the
module.
7 Drv 1 Logic Cmd Logic Command being transmitted to drive 1 by
the module.
8 Drv 1 Reference Reference being transmitted to drive 1 by the
module.
9 Drv 1 Logic Sts Logic Status being received from drive 1 by the
module.
10 Drv 1 Feedback Feedback being received from drive 1 by the
module.
11 Drv 2 Logic Cmd Logic Command being transmitted to drive 2 by
the module.
12 Drv 2 Reference Reference being transmitted to drive 2 by the
module.
13 Drv 2 Logic Sts Logic Status being received from drive 2 by the
module.