Rockwell Automation MD65 EtherNet/IP Communication Module - Manual (Page 14)

2-2 EtherNet/IP Communcations Module
2.1 Required Equipment
Table 2.1 lists the equipment shipped with the EtherNet/IP module.
When you unpack the module, verify that the package includes all of
these items.
To install and configure the EtherNet/IP module, you must supply
the items listed in table 2.2.
Table 2.1 – Equipment Shipped with the EtherNet/IP Module
Item Description
One EtherNet/IP Communications Module
One 15.24 cm (6 in) Internal Interface cable
One EtherNet/IP Communications Module User Manual (D2-3529)
Table 2.2 – User-Supplied Items Required for Installation
Item Description
Small flathead or Phillips screwdriver
Ethernet cable (Refer to the EtherNet/IP Media Planning and
Installation Manual, publication ENET-IN001..., for details.)
Configuration tool, such as
• MD65 LCD OIM
• VS Utilities
• BOOTP Server (version 2.1 or higher) for network setup only
Controller configuration software (for example: RSLogix 5,
RSLogix 500, RSLogix 5000 software)
PC connection to the EtherNet/IP network.