Rockwell Automation MD65 EtherNet/IP Communication Module - Manual (Page 94)

9-6 EtherNet/IP Communications Module
9.2 Module Diagnostic Items in Single
Drive Mode
Table 9.5 lists diagnostic items that can be accessed using
VS Utilities software or the LCD OIM. Diagnostic items can help you
or Rockwell Automation personnel troubleshoot communication
problems.
Table 9.5 – Module Diagnostic Items (Single Drive Mode)
No. Name Description
1 Reserved
2 Logic Cmd Logic Command being transmitted to the drive by
the module.
3 Reference Reference being transmitted to the drive by the
module
4 Reserved
5 Logic Sts Logic Status being received from the drive by the
module.
6 Feedback Feedback being received from the drive by the
module.
7 -
22 Reserved
23 MDI Overrun Errs The number of MDI receive overrun errors.
24 MDI Framing Errs The number of MDI receive framing errors.
25 MDI CRC Errs The number of MDI receive CRC errors.
26 Boot Flash Count Number of boot firmware flash updates made to the
module after shipping.
27 App Flash Count Number of application firmware flash updates made
to the module after shipping.
28 HW Addr 1 The most significant byte in the module’s EtherNet
MAC address.
29 HW Addr 2 The second most significant byte in the module’s
EtherNet MAC address.
30 HW Addr 3 The third most significant byte in the module’s
EtherNet MAC address.
31 HW Addr 4 The third least significant byte in the module’s
EtherNet MAC address.
32 HW Addr 5 The second least significant byte in the module’s
EtherNet MAC address.
33 HW Addr 6 The least significant byte in the module’s EtherNet
MAC address.