Rockwell Automation 2711-ND3 PanelBuilder32 Quick Start Manual - Manual (Page 44)

44 Publication 2711-QS003D-EN-P - June 2009
Chapter 3 Creating the Application
Create the Screen Title for the Motor Status Screen
1. Select Objects>Text.
2. Position the pointer (+) at the top of the screen, hold down the
left mouse button and drag to draw the text box.
You are placed in text mode.
3. Enter the text as shown; the text it also entered in the text box.
4. Click the Toggle Fore/Background tool to reverse the
foreground and background colors of the object.
5. Click the Text Size tool and select 8 x 24 from the menu.
6. Deselect the object by clicking anywhere outside the object.
Screen Heading
TIP
An asterisk appears (*) if the text box is too small for the text.
Select the object and then drag a handle to size the text box
until the text fits.
IMPORTANT
Select Arrange>Bring Dynamic Objects to Front to move control
objects to the front of other objects. This makes sure the control
objects are not covered by static objects such as text.