Rockwell Automation 2706-LSW DL40 PLUS OFFLINE PROG.SFTWR.USER MANUAL - Manual (Page 7)

Using this Manual P–2
Publication 2706-6.2
The following conventions are used in this manual:
•
All menus and screens reproduced in this manual approximate
what you see when using the software.
•
A symbol or word in brackets represents a single key that you
press. These include keys such as [A] or [Del]. Since the
Dataliner can be programmed with a variety of keyboards or
terminals, the printing on your keyboard may be different from
the symbol or word indicated in brackets.
•
This manual uses
↵
to specify the carriage return function of a
keyboard. On your keyboard this may correspond to an
[ENTER],
↵
, or [Rtrn] key.
•
The up caret, ^ , is the symbol for a control character. For
example: ^ W is the symbol for a Control W character. On most
computers this character is entered by pressing [Ctrl] and [W]
simultaneously.
•
In the following chapters, we refer to the Dataliner DL40 Plus
Message Display as the DL40.
Other publications to which you may want to refer include:
•
Dataliner DL40 Plus Message Display User Manual,
(Publication 2706-6.1)
•
Dataliner DL40 Plus Message Displays Release Note (provided
with DL40 Plus display) is helpful if you are replacing an existing
DL40 display with a DL40 Plus display.
Conventions Used
Related Publications