Rockwell Automation 2706-LSW DL40 PLUS OFFLINE PROG.SFTWR.USER MANUAL - Manual (Page 139)

PLC-5 Data Pass–Through D–7
Publication 2706-6.2
Select Modify Communications File on the Remote I/O upload or
download menus to modify an existing communications file.
If you want to modify an already specified Communication File,
highlight Select Communication File on the file Transfer menu.
To modify a file from another directory, highlight Directory and
press [CR] and the Program’s Data Path window opens. Enter
directory in the format:
Drive:\Directory
Press [
↵
] . The File Selections window opens. Highlight file you
want to modify; press [
↵
] . Note: All Communication Files have
the suffix .UDU.
Highlight Modify Configuration File in the Download window and
press [
↵
] . The Communication File window opens.
Highlight parameter you want to modify and press [
↵
] . Select
parameter setting and press [
↵
] . When you highlight DH +
Hardware Device and press [
↵
] the window opens.
Set device parameters.
After all parameters are set, highlight Quit and press [
↵
] .
Modifying Existing
Communication Files