Rockwell Automation 2755 AtomScan Bar Code Reader - Manual (Page 82)

5–37 Configuring Your Reader
Publication 2755-6.9
•
Beeper
Command Parameter Format Example
Beeper Status
0 = On Good
1 = On No Read
Beeper Volume
0 = Off
To set the beeper for On No Read and
1 = Level 1
Ku set the beeper volume to Off, press
[]
2 = Level 2
[] .
3 = Level 3
4 = Level 4
5 = Level 5
•
Laser On/Off
Command Parameter Format Example
Status
0 = Disabled KC
To enable Laser On/Off, press
[]
1 = Enabled
KC
[] .
•
Serial Verification
Command Parameter Format Example
Serial Command Echo Status
0 = Disabled
1 = Enabled
Serial Command Beep Status
To enable Serial Command Echo Status,
0 = Disabled KS
status,serial command
To enable Serial Command Echo Status,
Beep status, and Hex Output, press
1 = Enabled
KS
beep status,control/hex
Beep status, and Hex Output, press
[] .
Control/hex Output
output>
0 = Control
1 = Hex
•
User Output Status Request. Allows you to return the status of
each command in the group.
Parameter Format
KX
•
Partial Label Output. Allows you to transmit a portion of the
label to the host.
Command Parameter Format Example
Status
0 = Disabled
1 = Enabled
To enable Partial Label Output starting
Start Position KY
To enable Partial Label Output starting
at character 4 and ending at character 8
KY
position,length>
at character 4 and ending at character 8
[] 1 to 63. 1 is the default. of the string, press [] .
Length
1 to 63. 63 is the default.