Rockwell Automation 2755 AtomScan Bar Code Reader - Manual (Page 74)

5–29 Configuring Your Reader
Publication 2755-6.9
•
Postamble. You can enter one or two postamble characters except
a null (00H).
Command Parameter Format Example
Status
0 = Disabled Ke
To disable Postamble, press
[]
1 = Enabled
Ke
character(s)> [] .
•
LRC
Command Parameter Format Example
Status
0 = Disabled Kc To enable LRC, press [] .
1 = Enabled
Kc To enable LRC, press [] .
•
Response Timeout. You can use any number from zero to 65,000.
(A zero causes an indefinite wait.) The default is 12 ms.
Parameter Format Example
KA
To change Response Timeout to 30 ms,
press
[] .
•
Intercharacter Delay. You can use any number from zero to 255.
The default is zero.
Parameter Format Example
KB
To change Intercharacter Delay to
30 ms, press
[] .