Rockwell Automation 2755 AtomScan Bar Code Reader - Manual (Page 75)

5–30 Configuring Your Reader
Publication 2755-6.9
•
Host Port. Changes made in the reader’s communications
parameters such as baud rate, parity, stop bits, LRC, etc., must be
matched in the other device(s) or communications will be lost. If
this occurs, default the reader with the Restore/Save
Default Configuration for Power-on command.
Command Parameter Format Example
Baud Rate
0 = 600
1 = 1200
2 = 2400
3 = 4800
4 = 9600
5 = 19200
6 = 38400
7 = 76800
8 = 300 To change Host Port Baud Rate to 2400,
Parity
Ka
bits,data bits> To change Host Port Baud Rate to 2400,
press
[] .
0 = None
[ ]
1 = Even
2 = Odd
Stop Bits
0 = One
1 = Two
Data Bits
0 = Seven
1 = Eight