Related documentation, Web sites, Integrated motion control – Rockwell Automation 2090-XBxxx Resistive Brake Module Installation Instructions User Manual
Page 24: Literature library, Rockwell automation, Technical support, Motion control selection guide

Publication 2090-IN009F-EN-P — November 2004
319232-P06
Supersedes Publication 2090-IN009E-EN-P
Copyright © 2004 Rockwell Automation. All rights reserved. Printed in USA.
For more information refer to our web site
Allen-Bradley, A-B, and Kinetix are registered trademarks of Rockwell Automation.
ControlLogix, Ultra3000, and Ultra5000 are trademarks of Rockwell Automation.
Windows is a registered trademark of Microsoft Corporation.
UL is a registered trademark of Underwriters Laboratories, Inc.
Related Documentation
These publications provide additional information concerning related
Allen-Bradley products. To order printed copies, contact your Allen-Bradley
Distributor. To view and download, go to Literature Library at
For Information About
Read This Document
Publication Number
Installing, wiring, and troubleshooting a Kinetix 6000 drive
Kinetix 6000 Installation Manual
2094-IN001x-EN-P
Configuring a Kinetix 6000 drive and system
Kinetix 6000 Integration Manual
2094-IN002x-EN-P
Programming a motion application using Logix
Logix Controller Motion Instruction Set Reference Manual
1756-RM007x-EN-P
ControlLogix™ motion and application examples
ControlLogix Motion Module Programming Manual
1756-RM086x-EN-P
Configuring and troubleshooting ControlLogix motion modules
ControlLogix Motion Module Setup and Configuration
Manual
1756-UM006x-EN-P
Minimizing and controlling system-level noise
System Design for Control of Electrical Noise
GMC-RM001x-EN-P
Sizing and configuring an application
Motion Book Servo Sizing CD
(v4.0 or above)
Motion Book-mmmyy
Servo drives, motor, and accessories, including general technical
specifications
Motion Control Selection Guide
GMC-SG001x-EN-P
Information about international standards EN1050 and EN954
estimation and safety performance categories.
Understanding the Machinery Directive
SHB-900