Rockwell Automation 8720MC High Performance Drives Installation Manual - Manual (Page 124)

Publication 8720MC-IN001D-EN-P — December 2002
C-4 Catalog Numbers and Accessories
8720SM Motors Use the configurator below to identify 8720SM motor catalog
numbers.
1
Feedback options 1 and 2 apply to SERCOS mode applications. Feedback options 3 and 4 apply to Analog mode
applications.
Cables Use the following tables to identify motor power, feedback, and brake
cables for your 8720MC drive. Length of cable xx is in meters. Refer to
your Allen-Bradley representative for available cable lengths.
Motor Power Cables
1
This cable applies only to the MPL-B980D motor.
Note: Power cables for 8720SM motors are customer supplied.
8720SM - xxx x x xx S x
Feedback
1 = SRS-660 (high resolution incremental feedback, MP-Series connector)
2 = SRM-60 (high resolution absolute feedback, MP-Series connector)
3 = SNS-60 (incremental feedback with marker)
4 = SNS-60 (incremental feedback with marker, MP-Series connector)
Speed Class
S = Standard
Frame Number
1 = 112
2 = 132
3 = 132A
Winding Type
S = Single
Power
005 = 30 kW
007 = 37 kW
011 = 45 kW
015 = 55 kW
018 = 63 kW
022 = 75 kW
030 = 30 kW
Bulletin Number
4 = 160
5 = 180
6 = 200
037 = 37 kW
045 = 45 kW
055 = 55 kW
063 = 63 kW
075 = 75 kW
093 = 93 kW
1
Curve Identification
Refer to publication 8720MC-IN002x-EN-P
IMPORTANT
To avoid control performance problems, ensure the
overall length of motor cable combinations (drive to
motor) does not exceed 90 m (295 ft).
Description Catalog Number
MP-Series Motor Power Cable, non flex, 8 AWG, straight 2090-CDNPBMP-8Sxx
MP-Series Motor Power Cable, non flex, 6 AWG, straight 2090-MCNPMP-6Sxx
1