System requirements, Chapter – Rockwell Automation 2711E-ND7 PanelView 1400E File Transfer Utility User Manual

Page 16

Chapter

Publication 2711E–6.8 – January 1998

Working with the PanelView

1200/1400e Transfer Utility

This chapter provides instructions for setting up and using the
PanelView 1200/1400e Transfer Utility, including:

•

minimum hardware and software requirements

•

installing and starting the PanelView 1200/1400e Transfer Utility

•

exiting from the PanelView 1200/1400e Transfer Utility

The PanelView 1200/1400e Transfer Utility has context-sensitive
online help that you can access at any time by pressing

on your

keyboard. For general help, click the icon

in the utility’s

toolbar.

For information on how to set up and use the PanelView 1200
Transfer Utility, see the PanelView 1200 Transfer Utility User
Manual (Publication Number 2711-811).

You need the following hardware and software to install the
PanelView 1200/1400e Transfer Utility from the disks.

Hardware and Software Requirements

Requirements

FTU

FTU32

Hardware

A personal computer with a 25-MHz, 386-DX or higher
microprocessor, with a recommended minimum of
8-MB RAM

A personal computer with a 50-MHz, 486-DX or higher
microprocessor, with a recommended minimum of
16-MB RAM

CD-ROM drive (recommended)

A fixed disk with 10 MB of free space

An 8-MB swap file

A 3.5-inch high-density (1.44-MB) disk drive

An RS-232 serial port for uploading or downloading
applications, or other communication cards listed later
in this chapter

A standard VGA (640 by 480) display adapter
configured for at least 16 colors

A mouse or pointing device supported by Windows

Software

Microsoft Windows Version 3.x or Windows 95

Microsoft Windows NT Version 4.0, or Windows 95

Microsoft MS-DOS Version 3.3 or above

System Requirements