Rockwell Automation 2707-L40X_L8X_V40X DTAM Plus Operator Interface Module Installation Instructions - Manual (Page 62)

Chapter 3
Using the Function Menu
3–20
Use the Test menu to perform variety of tests that check the status of the
DTAM Plus functions and hardware. You can access all of the Test options
from the Function menu.
This section shows how to access the test functions. For details on how to
perform each test, see Chapter 7 Troubleshooting and Maintenance.
To access the Test functions:
From the Function Menu, select Test [7].
1 C-Port 5 Special
2 P-Port 6 Term
3 Clk/Cal 7 Test
4 Reset 8 Other
The test screen appears:
DTAM Plus Diagnostic
NEXT to Select Test
ENTER To Initiate
Reset DUT
Current Test Selection
The last line displays the current text selection. Press [NEXT] to toggle
through all the options. Press [
] to initiate the selected test.
You can run the following tests from the Test menu.
•
Reset DUT (DTAM Under Test)
•
DIP switch positions
•
Display
•
Keyboard
•
Communications port
•
Printer Port
•
Display Control
•
Random Access Memory (RAM)
•
System Memory
•
Program File
•
Clock/Calendar
•
Transmit Enable and Alarm
Accessing Test Functions