Rockwell Automation 2707-L40X_L8X_V40X DTAM Plus Operator Interface Module Installation Instructions - Manual (Page 24)

Chapter 1
DTAM Plus OverView
1–12
Operating Parameters
You can set the following parameters using the DTAM Plus menu functions.
Default Value
Function Parameter
Comm Port
RS-485
Comm Port
RS-232
Remote I/O Port
Baud 19200 2400 2400
Comm Port Data Bits 8 8 8
Parity Even None None
Baud 9600 9600 9600
Data Bits 8 8 8
Parity Even Even Even
Printer Port
Handshake Off Off Off
LineFeed Off Off Off
Port Enable On On On
Baud N/A N/A 230.4K
Rack Size N/A N/A Full
Remote I/O
Last Rack N/A N/A Yes
Port
Rack Number N/A N/A 2
Module Group N/A N/A 0
DTAM Plus Node 00 N/A N/A
Special Max. Node 02 N/A N/A
Controller Node 01 N/A N/A
Simulate Off Off Off
Other Master Code 00000000 00000000 00000000
Scale On On On
DTAM Plus applications are developed off-line using a personal computer
running DTAM Programming Software (DPS). DTAM Plus operating
system upgrades are also transferred using a personal computer.
Use DPS software (Catalog No. 2707-NP, Series H or later) to create
application screens for both the DTAM Plus, DTAM Micro and MicroView
Operator Terminals. For a description of DPS, refer to the Programming
Manual (Publication No. 2707-801).
DTAM
Programming Software
(DPS)