2 - installation and wiring, Compliance to european union directives, Emc directive – Rockwell Automation 1769-OF4VI Compact I/O Isolated Analog Modules User Manual
Page 17: Low voltage directive, Chapter 2, Installation and wiring, Compliance to european union directives -1, Emc directive -1, Chapter

1
Publication 1769-UM014B-EN-P - May 2010
Chapter
2
Installation and Wiring
This chapter tells you how to:
determine the power requirements for the modules.
avoid electrostatic damage.
install the module.
wire the module’s terminal block.
wire input devices.
wire output devices.
Compliance to European
Union Directives
This product is approved for installation within the European Union and EEA
regions. It has been designed and tested to meet the following directives.
EMC Directive
The analog modules are tested to meet Council Directive 2004/108/EC
Electromagnetic Compatibility (EMC) and the following standards, in whole
or in part, documented in a technical construction file:
EN 61000-6-4
EMC – Generic Emission Standard, 6-4 - Industrial Environment
EN 61000-6-2
EMC – Generic Immunity Standard, Part 6-2 - Industrial Environment
This product is intended for use in an industrial environment.
Low Voltage Directive
This product is tested to meet Council Directive 2006/95/ECLow Voltage, by
applying the safety requirements of EN 61131-2 Programmable Controllers,
Part 2 – Equipment Requirements and Tests.
For specific information required by EN61131-2, see the appropriate sections
in this publication, as well as the following Allen-Bradley publications: