C - field device block configuration examples, Overview, Appendix c – Rockwell Automation 1788-CN2FFR EtherNet/IP and ControlNet to FOUNDATION Fieldbus Linking Device User Manual
Page 71: Field device block configuration examples, Field device block, Appendix
Rockwell Automation Publication 1788-UM057B-EN-P - September 2014
69
Appendix
C
Field Device Block Configuration Examples
Overview
This appendix provides examples of how to use field bus output devices with the
linking device.
Each example starts from an empty live list, adds the device to the network, and
configures an analog output (AO) or discreet output (DO) function.
The purpose of these examples is to place the AO or DO function block in the
Cas mode, so the values entered in CAS_IN are processed into the SET_POINT
value.
Field Device Block Configuration on page 36
for general field device block
configuration information.
Figure 11 - Empty Live List
This manual is related to the following products: