Rockwell Automation 1788-CN2FFR EtherNet/IP and ControlNet to FOUNDATION Fieldbus Linking Device - Manual (Page 67)

Rockwell Automation Publication 1788-UM057B-EN-P - September 2014 65
Appendix
B
HSProcessUtility
Use the
HSProcessUtility Follow these steps to use the HSProcessUtility to add a device description to a
field device.
1. Click the HSProcessUtility icon in the AOP and click Launch
HSProcessUtility.
The HSProcessUtility opens. Because the same utility is used to register
GSD files (PROFIBUS PA) and DTMs, these options are still in the menu
bar.
2. Select the FOUNDATION Fieldbus option and choose Add Device
Description. Three files are required to update the library:
•
Binary file (.ffo)
• Symbol file (.sym)
• Capability file (.cff )
TIP You can also click the refresh catalog option to refresh the device
catalog once a DD file has been added.