Rockwell Automation 1788-CN2FFR EtherNet/IP and ControlNet to FOUNDATION Fieldbus Linking Device - Manual (Page 55)

Rockwell Automation Publication 1788-UM057B-EN-P - September 2014 53
Logix Assemblies Chapter 3
PVDiagnostics
This tag contains the diagnostics information that is associated with each PV.
Output This section describes the values on the field device output status screen.
Field Device Output Values
PVReal1…PVReal8
For a field device that requires an output, the data must be updated in the output
image of that field device. If the data type for the connector is set to Float, then
the data for that connector is read from the real value in the output image.
PVInt1…PVInt8
For a field device that requires an output, the data must be updated in the output
image of that field device. If the data type for the connector is set to Integer, then
the data for that connector is read from the integer value in the output image.