Rockwell Automation 1788-CN2FFR EtherNet/IP and ControlNet to FOUNDATION Fieldbus Linking Device - Manual (Page 22)

20 Rockwell Automation Publication 1788-UM057B-EN-P - September 2014
Chapter 1 Installation
Software Installation You need the AOP for the Studio 5000 Logix Designer application to configure
and manage the linking device. The installation of the AOP includes the
HSProcessUtility that is used to manage DTMs and DD service libraries. See
Appendix B .
For the latest compatible software information and to download the AOP, see the
Product Compatibility and Download Center at
http://www.rockwellautomation.com/rockwellautomation/support/
pcdc.page#/tab2
.
The AOP version of the linking device is located on the display during the start
up process, or via the web server.
Firmware Version
The firmware version is printed on the linking device and displayed on the screen
during power-up.
TIP You can also click the upper-left corner of the profile window and click About
Module Profile to view the AOP version.